Mastercam Version 9 Workbook
Print Book
Out of Print
Beginner
306 Pages
Published December 31, 2002
ISBN: 978-1-58503-089-7
- Description
- Contents
- Downloads
- Details
Description
This purpose of this workbook is to give new users a basic introduction to Mastercam's functionality and features. Topics covered include creating models using Mastercam, importing geometry from other CAD packages, setting up a job, and creating facing, contouring, pocket, drill/surface, and lathe toolpaths. This book is not intended to be a reference guide.
Table of Contents
- Introduction to Mastercam
- Creating 2D Geometry
- Creating 3D Geometry
- Creating Surface Geometry
- Importing Existing Geometry
- Creating a Job Setup
- Creating Facing Toolpaths
- Creating Contouring Toolpaths
- Creating Pocket Toolpaths
- Creating Drill/Surface Toolpaths
- Introduction to Mastercam Lathe
Downloads
The author has provided several IGES files for the Mastercam Workbook. These files are compressed (zipped) and available for download.
Description Size
Hammer Handle 10.5 KB
Lesson 5 Exercise 1 7.7 KB
Lesson 5 Exercise 2 8.8 KB
Lesson 5 Exercise 3 8.2 KB
Lesson 5 Exercise 4 11.4 KB
Lesson 5 Exercise 5 8.2 KB
Tutorial Plate 31.2 KB
For additional information on downloading, unzipping, and using these files visit the downloads section on our Frequently Asked Questions page.
Product Details
| Publisher | SDC Publications |
| Authors | Richard Cozzens |
| Media Types | Print Book |
| Primary Languages | English |
| Published | December 31, 2002 |
| User Level | Beginner |
| Pages | 306 |
| Binding | Paperback |
| Printing | Black and White |
| Print ISBN | 978-1-58503-089-7 |
| Print ISBN 10 | 1585030899 |