Book Errata

Errata

0 vi

The Bonus Videos Index contains an entry for "7-3 Sloped Ceiling." This video is not available. It was mistakenly included in this list.

Chapter 1 Page 41

Autodesk has replaced Autodesk 360 (A360) with Autodesk Drive. The functionality covered in the book is similar in Autodesk Drive. Following the links provided in the book will provide you with a link to the new site. Alternatively, use this link to access Autodesk Drive: https://drive.autodesk.com/

Chapter 5 Page 46

Fig. 5-4.10 should read 'Nine windows added: Window-Double-Hung: 38” x 62”.'

Chapter 6 Page 24

The second paragraph says the “UP” label in Figure 6-5.3 indicates where you should access the stair on the first floor. The "UP" label is not present on the image as described in the book. The image below contains the "UP" label.

Chapter 6 Page 31

In the second tip it says: you can click the "edit sketch" icon on the Ribbon. This should read "edit stairs" instead of "edit sketch."

Chapter 7 Page 16

9. Should read Spot Slope.

Chapter 9 Page 8

Step 31. Should reference Figure 9-1.11.

Chapter 10 Page 12

The paragraph after step 13. Should read: Why did the window location dimensions update in Figure 10-2.2 and not in Figure 10-2.5?

Chapter 10 Page 35

Under step 33: "Architecture-->Forms-->Extrusion" should be changed to "Create-->Forms-->Extrusion."

Chapter 11 Page 3

Step 8, paragraph 3 Should state, "You may also notice a big problem, as first mentioned on page 6-33…".

Chapter 11 Page 26

Figures 11-4.2 and 11-4. should show the dimension as 3'-10". The corrected figures are available about below.

FIGURE 11-4.2 Selected dimension properties

FIGURE 11-4.3 Dimension with suffix

Chapter 11 Page 31

Step 20: 'Annotation" should be changed to "Annotate."

Chapter 14 Page 27

Step 47. Should ask you to refer back to the Design Options section on page 10-25.