Book Errata

Errata

Chapter 1 Page 36

Autodesk has replaced Autodesk 360 (A360) with Autodesk Drive. The functionality covered in the book is similar in Autodesk Drive. Following the links provided in the book will provide you with a link to the new site. Alternatively, use this link to access Autodesk Drive: https://drive.autodesk.com/

Chapter 4 Page 33

Step 49c and Figure 4-3.17 show the incorrect RGB values for 'G' (green). It should be 224. Not 226 as shown in the book. See the image below.

Chapter 5 Page 23

Figure 5-2.10, shows the option as "standard". Instead, the image should show "no calculation". See the corrected image below.

Chapter 9 Page 20

Step 25 should reference page 8-47 and not page 8-20.

Chapter 10 Page 17

Step 2. This website has changed. The instructions should now direct you to: Go to Architects → Revit/CAD -- Casework, select one of the Revit options, and then click Download All Revit Blocks to download this file (70+mb): Modular Casework - May 2022.zip

Chapter 10 Page 25

On step 6, it should say that MCBH363035 should be placed in the model.

Chapter 10 Page 26

Use the provided Revit family file (HCS_MCSA_Corrected,rfa), which has been corrected for an alignment issue in the downloaded files from the manufacturer

Chapter 10 Page 41

Updated download instructions:

From the Hamilton casework library previously downloaded:

1. HCS_MCBE.rfa (Base Cabinet - 2 Door 1 Drawer)
   • Type: MCBE302433
2. HCS_MCBI.rfa (Base Cabinet – Sink)
   • Type: MCBI362433
3. HCS_MCDD.rfa (Base Cabinet – 4 Drawer)
   • Type: MCDD242433
4. HCS_MCWA.rfa (Wall Cabinet - 2 Door)
   • Type: MCWA301418
   • Type: MCWA301436
   • Type: MCWA361424
5. HCS_MCWB_C.rfa (Wall Cabinet - 1 Door)
   • Type: Right MCWC231436
6. HCS_MCPF.rfa (Accessories - Base End Filler)
   • Type: MCPF33
7. HCS_MCPH.rfa (Accessories - Wall Cab Filler)
   • Type: MCPH36

FYI: Model numbers change occasionally. In that case, select a similar style and size.

Chapter 10 Page 42

Figure 10-5.7 has been revised with updated labels.

Chapter 10 Page 43

Figure 10-5.8 has been revised with updated labels.