Book Errata
Interior Design Using Autodesk Revit 2019
Introduction to Building Information Modeling for Interior Designers
- View Errata
- Submit Errata
Errata
- Chapter 1 Page 36
Autodesk has replaced Autodesk 360 (A360) with Autodesk Drive. The functionality covered in the book is similar in Autodesk Drive. Following the links provided in the book will provide you with a link to the new site. Alternatively, use this link to access Autodesk Drive: https://drive.autodesk.com/
- Chapter 4 Page 33
Step 49c and Figure 4-3.17 show the incorrect RGB values for 'G' (green). It should be 224. Not 226 as shown in the book. See the image below.
- Chapter 4 Page 48
Figure 4-5.1 - The name field should say "post-consumer content". Below is a corrected image.
- Chapter 5 Page 23
Figure 5-2.10, shows the option as "standard". Instead, the image should show "no calculation". See the corrected image below.
Submit Errata
Your information will remain private. We will only use your information if we need to contact you for further details regarding the correction you submit.