CATIA V5 FEA Tutorials Release 21 small book coverPreview this book

CATIA V5 FEA Tutorials Release 21

Published August 24, 2012
528 Pages
ISBN: 978-1-58503-764-3


Key Features

  • Introduces new users to the Finite Element Analysis capabilities of CATIA 21
  • Covers a wide variety of problems using step by step tutorials
  • Each chapter is completely independent of each other
  • Intended for people already familiar with the basics of using CATIA

In Detail

The objective of this tutorial book is to expose the reader to the basic FEA capabilities in CATIA V5 Release 21. The chapters are designed to be independent of each other allowing the user to pick specific topics without the need to go through the previous chapters. However, the best strategy to learn is to sequentially cover the chapters.

In this workbook, the parts created in CATIA are simple enough they can be modeled with minimal knowledge of this powerful software. The reason behind the simplicity is not to burden the reader with the CAD aspects of the package. However, it is assumed that the user is familiar with CATIA V5 Release 21 interface and basic utilities such as pan, zoom, and rotation.

The tutorials are based on release 21; however, other releases can also be used with minor changes. Typically, the differences are not even noticed by a beginner.

Table of Contents

  1. Introduction
  2. Analysis of a Bent Rod with Solid Elements
  3. Axially Loaded Block with Stress Concentration
  4. Stress Analysis of a Rotating Disk
  5. Deformation of an I-beam under Self-weight
  6. C-clamp Deformed with Enforced Displacement
  7. FEA Modeling of the Bent Rod with Beam Elements
  8. Beam Elements under Enforced Displacement
  9. Bending of a Notched Specimen with Smooth Virtual Part
  10. Analyzing a Loaded Bracket with Triangular Shell Elements
  11. Modeling Mismatch in Shell Thickness and Surface Mesher
  12. Analysis of Thin Walled Pressure Vessel using Shell Elements
  13. Using the “Surface Mesher” to Simplify Geometry
  14. FE Model of a Bearing-Shaft Assembly using Analysis
  15. Connection
  16. Shrink Fit Analysis
  17. Analysis of a Tensile Specimen as an Assembly
  18. Analysis of a Fastened Assembly
  19. Thermal Stresses in a Bi-metallic Strip
  20. Hybrid Mesh Analysis
  21. Spring Elements
  22. Adaptive Refinement
  23. Free Vibration of a Simply Supported Beam
  24. Buckling Analysis
  25. A Simple Spot Weld Analysis
  26. Defining Restraints or Loads on Patches
  27. Limited Hexahedral Element Capabilities
  28. Frequency Response Analysis of a Simply Supported Beam
    Appendix I Miscellaneous Comments
Related categories:
Books > FEA / CAE > CATIA > Release 21