CATIA V5 FEA Tutorials Release 19 small book coverPreview this book

CATIA V5 FEA Tutorials Release 19

Out of Print
Published February 8, 2010
581 Pages
ISBN: 978-1-58503-586-1


Key Features

  • Covers all the major Finite Element Analysis (FEA) features of CATIA 19
  • Each chapter is completely independent of each other
  • Covers a wide variety of FEA problems

In Detail

The objective of this tutorial book is to expose the reader to the basic FEA capabilities in CATIA V5 Release 19. The chapters are designed to be independent of each other allowing the user to pick specific topics without the need to go through the previous chapters. However, the best strategy to learn is to sequentially cover the chapters.

In this workbook, the parts created in CATIA are simple enough they can be modeled with minimal knowledge of this powerful software. The reason behind the simplicity is not to burden the reader with the CAD aspects of the package. However, it is assumed that the user is familiar with CATIA V5 Release 19 interface and basic utilities such as pan, zoom, and rotation.

The tutorials are based on release 19; however, other releases can also be used with minor changes. Typically, the differences are not even noticed by a beginner.

Table of Contents

  1. Introduction
  2. Analysis of a Bent Rod with Solid Elements
  3. Axially Loaded Block with Stress Concentration
  4. Stress Analysis of a Rotating Disk
  5. Deformation of an I-beam under Self-weight
  6. C-clamp Deformed with Enforced Displacement
  7. FEA Modeling of the Bent Rod with Beam Elements
  8. Beam Elements under Enforced Displacement
  9. Bending of a Notched Specimen with Smooth Virtual Part
  10. Analyzing a Loaded Bracket with Triangular Shell Elements
  11. Modeling Mismatch in Shell Thickness and Surface Mesh
  12. Analysis of Thin Walled Pressure Vessel using Shell Elements
  13. Using the "Surface Mesher" to Simplify Geometry
  14. FE Model of a Bearing-Shaft Assembly using Analysis Connection
  15. Shrink Fit Analysis
  16. Analysis of a Tensile Specimen as an Assembly
  17. Analysis of a Fastened Assembly
  18. Thermal Stresses in a Bi-metallic Strip
  19. Hybrid Mesh Analysis
  20. Spring Elements
  21. Adaptive Refinement
  22. Free Vibration of a Simply Supported Beam
  23. Buckling Analysis
  24. A Simple Spot Weld Analysis
  25. Defining Restraints or Loads on Patches
  26. Limited Hexahedral element Capabilities
  27. Frequency Response of a Simply Supported Beam
    Appendix: Miscellaneous Comments
Related categories:
Books > FEA / CAE > CATIA > Release 19