https://www.sdcpublications.com/Textbooks/SolidWorks-2014-Part-I-Basic/ISBN/978-1-58503-853-4/Errata/A list of the know errors for the book SolidWorks 2014 Part I - Basic Tools.Sun, 05 Apr 2026 07:36:01 -0500http://www.rssboard.org/rss-specification984https://static.sdcpublications.com/images/common/logo_rss.pnghttps://www.sdcpublications.com/Textbooks/SolidWorks-2014-Part-I-Basic/ISBN/978-1-58503-853-4/Errata/14454SaturdaySunday<p> Page 6-16 says "<strong>click Extruded Cut</strong>" but it is supposed to say "<strong>click Extruded Boss-Base</strong>". </p> https://www.sdcpublications.com/Textbooks/SolidWorks-2014-Part-I-Basic/ISBN/978-1-58503-853-4/Errata/<p> The image on the top of page 9-20 does not show the fillet created in previous steps. When creating the Helix in step 11 be sure to select the <strong>Inner Circular Edge</strong>. The image on the bottom right of page 9-20 shows the fillet and the area where the Helix is to be created. </p> https://www.sdcpublications.com/Textbooks/SolidWorks-2014-Part-I-Basic/ISBN/978-1-58503-853-4/Errata/<p> The outer curved-edge of the tooth should be used instead of the Construction Circle. </p> https://www.sdcpublications.com/Textbooks/SolidWorks-2014-Part-I-Basic/ISBN/978-1-58503-853-4/Errata/<p> Under the step number 4, paragraph 3, the instruction should say to "Move the Rack to create a gap between the teeth." </p> https://www.sdcpublications.com/Textbooks/SolidWorks-2014-Part-I-Basic/ISBN/978-1-58503-853-4/Errata/<p> Should say 90 deg for Maximum and 0 deg for Minimum. The screenshot is correct. </p> https://www.sdcpublications.com/Textbooks/SolidWorks-2014-Part-I-Basic/ISBN/978-1-58503-853-4/Errata/