https://www.sdcpublications.com/Textbooks/SOLIDWORKS-2024-Intermediate-Skills/ISBN/978-1-63057-631-8/Errata/A list of the know errors for the book SOLIDWORKS 2024 Intermediate Skills.Tue, 14 Apr 2026 10:15:46 -0500http://www.rssboard.org/rss-specification824https://static.sdcpublications.com/images/common/logo_rss.pnghttps://www.sdcpublications.com/Textbooks/SOLIDWORKS-2024-Intermediate-Skills/ISBN/978-1-63057-631-8/Errata/14454SaturdaySunday<p> The image at the top of the page should show a size of <strong>1.000-12</strong> (not 1.250-12) and the text next to the image should read <strong>Disable Mirror Profile</strong> (not Enable Mirror Profile). </p> https://www.sdcpublications.com/Textbooks/SOLIDWORKS-2024-Intermediate-Skills/ISBN/978-1-63057-631-8/Errata/<p> Step 17 should also note that the .008 fillet should also be added to the tail fins tips, as shown in the completed model. Select the Front and Back edges of the floats on both sides and also the 3 edges of the tail fin tips. </p>https://www.sdcpublications.com/Textbooks/SOLIDWORKS-2024-Intermediate-Skills/ISBN/978-1-63057-631-8/Errata/ <p> Step 21, fourth paragraph, you should not enable the Reverse checkbox as directed in the text and shown in the figure. <strong>Enable only the Single Direction checkbox</strong> to display the direction arrow. It should be pointing towards the wings. </p> https://www.sdcpublications.com/Textbooks/SOLIDWORKS-2024-Intermediate-Skills/ISBN/978-1-63057-631-8/Errata/ <p> The image under step 3 shows a tangent relation between the marked line and arc. This tangent relation is not needed as the model is fully defined without it. </p> https://www.sdcpublications.com/Textbooks/SOLIDWORKS-2024-Intermediate-Skills/ISBN/978-1-63057-631-8/Errata/