https://www.sdcpublications.com/Textbooks/SOLIDWORKS-2016-Basic-Tools/ISBN/978-1-63057-001-9/Errata/A list of the know errors for the book SOLIDWORKS 2016 Basic Tools.Tue, 14 Apr 2026 13:21:50 -0500http://www.rssboard.org/rss-specification638https://static.sdcpublications.com/images/common/logo_rss.pnghttps://www.sdcpublications.com/Textbooks/SOLIDWORKS-2016-Basic-Tools/ISBN/978-1-63057-001-9/Errata/14454SaturdaySunday<p> Item A. Click line 1 points to the wrong figure. The image below shows the corrected image. </p><img src="https://static.sdcpublications.com/images/errata/9781630570019-3-10.jpg" style="max-width:100%;" /> https://www.sdcpublications.com/Textbooks/SOLIDWORKS-2016-Basic-Tools/ISBN/978-1-63057-001-9/Errata/<img src="https://static.sdcpublications.com/images/errata/9781630570019-18-1.jpg" style="float: none;max-width:100%;" /> <p> The intent is to keep the flange length at .500” measured from the inside face (left image). The sketch line should be changed to .454” if the option Bend Centerline is used (right image). The model shows the correct dimensions but the drawing, for some reason, does not. </p> https://www.sdcpublications.com/Textbooks/SOLIDWORKS-2016-Basic-Tools/ISBN/978-1-63057-001-9/Errata/<p> The dimensions on this page have been updated. See the image below for an accurate the corrected dimensions </p><img src="https://static.sdcpublications.com/images/errata/9781630570019-18-7.jpg" style="max-width:100%;" /> https://www.sdcpublications.com/Textbooks/SOLIDWORKS-2016-Basic-Tools/ISBN/978-1-63057-001-9/Errata/