SDC Publications: Residential Design Using Autodesk Revit 2023 Book Errata

Chapter 1 Page 41

Autodesk has replaced Autodesk 360 (A360) with Autodesk Drive. The functionality covered in the book is similar in Autodesk Drive. Following the links provided in the book will provide you with a link to the new site. Alternatively, use this link to access Autodesk Drive: https://drive.autodesk.com/

Chapter 4 Page 22

In the bulleted list summarizing the steps for using the Scale tool, an additional step should appear after “Select the Scale icon”:

Ensure the “Graphical” Scale option is selected on the Ribbon.

Although Graphical is typically the default Scale option, it should be selected before continuing with the remaining steps.

Chapter 4 Page 24

In the Water-Closet instructions, the radius for the rounded corner of the rectangular portion of the symbol should be specified as 1".

Chapter 6 Page 4

The second paragraph should read:

The two walls just drawn will be supported by the roof, which has not been drawn yet. The bottom of the walls is aligned with Level 2 because of the view you are in.

Chapter 7 Page 42

Revit content is no longer installed with Revit. Change the listed path "(C:\ProgramData\Autodesk\RVT 2023\Libraries\US Imperial\Doors)" to "(download content using Insert\Load Revit Family command, and search for family listed).

Chapter 10 Page 10

Last paragraph should specify 12'-3" as the dimension which will center the windows on the wall, as shown in figure 10-2.2.