https://www.sdcpublications.com/Textbooks/Parametric-Modeling-SolidWorks-2013/ISBN/978-1-58503-781-0/Errata/A list of the know errors for the book Parametric Modeling with SolidWorks 2013.Sat, 04 Apr 2026 19:25:53 -0500http://www.rssboard.org/rss-specification274https://static.sdcpublications.com/images/common/logo_rss.pnghttps://www.sdcpublications.com/Textbooks/Parametric-Modeling-SolidWorks-2013/ISBN/978-1-58503-781-0/Errata/14454SaturdaySunday<p> The original part drawing on page 5 of this chapter is missing the 30 dimension that is shown in the sketch at the bottom of page 13 in the horizontal direction. It's the dimension from the lower left corner of the sketch to the beginning of the arc, also from the left edge of the sketch to the center of the extruded boss feature. </p> https://www.sdcpublications.com/Textbooks/Parametric-Modeling-SolidWorks-2013/ISBN/978-1-58503-781-0/Errata/