https://www.sdcpublications.com/Textbooks/Parametric-Modeling-Creo-Parametric-3/ISBN/978-1-58503-912-8/Errata/A list of the know errors for the book Parametric Modeling with Creo Parametric 3.0.Tue, 14 Apr 2026 10:16:31 -0500http://www.rssboard.org/rss-specification823https://static.sdcpublications.com/images/common/logo_rss.pnghttps://www.sdcpublications.com/Textbooks/Parametric-Modeling-Creo-Parametric-3/ISBN/978-1-58503-912-8/Errata/14454SaturdaySunday<p> Step 6, if you cannot select the dimension, set the selection filter (at the lower right of the main screen ) from "Drawing View" to "General". </p> https://www.sdcpublications.com/Textbooks/Parametric-Modeling-Creo-Parametric-3/ISBN/978-1-58503-912-8/Errata/<p> The 2nd image should be the same as the 2nd image on page 6-44. </p> https://www.sdcpublications.com/Textbooks/Parametric-Modeling-Creo-Parametric-3/ISBN/978-1-58503-912-8/Errata/<p> Step 3 should be <strong>0.0625 inches</strong>. </p> https://www.sdcpublications.com/Textbooks/Parametric-Modeling-Creo-Parametric-3/ISBN/978-1-58503-912-8/Errata/<p> Step one is not needed. </p> https://www.sdcpublications.com/Textbooks/Parametric-Modeling-Creo-Parametric-3/ISBN/978-1-58503-912-8/Errata/