https://www.sdcpublications.com/Textbooks/Parametric-Modeling-Autodesk-Inventor-2014/ISBN/978-1-58503-799-5/Errata/A list of the know errors for the book Parametric Modeling with Autodesk Inventor 2014.Tue, 14 Apr 2026 14:56:13 -0500http://www.rssboard.org/rss-specification544https://static.sdcpublications.com/images/common/logo_rss.pnghttps://www.sdcpublications.com/Textbooks/Parametric-Modeling-Autodesk-Inventor-2014/ISBN/978-1-58503-799-5/Errata/14454SaturdaySunday<p> Exercise 1: Swivel base. The radius should be 0.25 for the two rounded corners. </p> https://www.sdcpublications.com/Textbooks/Parametric-Modeling-Autodesk-Inventor-2014/ISBN/978-1-58503-799-5/Errata/<p> The size of chamfer for (b) connector should be 1/16 x 45 degrees. </p> https://www.sdcpublications.com/Textbooks/Parametric-Modeling-Autodesk-Inventor-2014/ISBN/978-1-58503-799-5/Errata/<p> The size of chamfers for (f) & (g) should be 1/16 x 45 degrees. </p> https://www.sdcpublications.com/Textbooks/Parametric-Modeling-Autodesk-Inventor-2014/ISBN/978-1-58503-799-5/Errata/<p> Exercise 2. The height of the small end of the bracket (stop) of the hanging bracket should be 2 inches. </p> https://www.sdcpublications.com/Textbooks/Parametric-Modeling-Autodesk-Inventor-2014/ISBN/978-1-58503-799-5/Errata/