SDC Publications: Official Certified SOLIDWORKS Professional Certification Guide (SOLIDWORKS 2015 - 2017) Book Errata

Chapter 1 Page 17

Step 17 should read: Create the Extruded Boss feature from Sketch5. Enter the extruded distance of the Global Variable D. Depth D = 130mm. Click Reverse direction if needed.

The corresponding image should also show a depth of 130mm.

Chapter 1 Page 44

The second image on page 1-44 shows the incorrect value for "C". It should show "C" = 52deg. Below is the corrected image

Chapter 2 Page 31

Step 22 states: Enter 1088.85 grams. This is not correct. The correct number is 1137.03. See updated screen shot below