https://www.sdcpublications.com/Textbooks/Learning-Autodesk-Inventor-2014/ISBN/978-1-58503-796-4/Errata/A list of the know errors for the book Learning Autodesk Inventor 2014.Tue, 14 Apr 2026 10:13:13 -0500http://www.rssboard.org/rss-specification827https://static.sdcpublications.com/images/common/logo_rss.pnghttps://www.sdcpublications.com/Textbooks/Learning-Autodesk-Inventor-2014/ISBN/978-1-58503-796-4/Errata/14454SaturdaySunday<p> The image next to step 17 contains a dimension of 5.000. This dimension is in degrees. Inventor does not show a degree symbol for the dimension. </p> https://www.sdcpublications.com/Textbooks/Learning-Autodesk-Inventor-2014/ISBN/978-1-58503-796-4/Errata/<p> Step No. 4 should say: <br /> On your own, extrude 5 mm using the Symmetric option. </p> https://www.sdcpublications.com/Textbooks/Learning-Autodesk-Inventor-2014/ISBN/978-1-58503-796-4/Errata/<p> Step 11, the image should show <b>internal checked</b>. </p> https://www.sdcpublications.com/Textbooks/Learning-Autodesk-Inventor-2014/ISBN/978-1-58503-796-4/Errata/<p> For instruction 4, ISO pins might not be shown in Inventor by default. To correct this, the user should go to the pull-down menu and choose: Tools--&gt;Filters--&gt;ISO </p><img src="https://static.sdcpublications.com/images/errata/978-1-58503-693-6_8_43.jpg" style="float: none;max-width:100%" />https://www.sdcpublications.com/Textbooks/Learning-Autodesk-Inventor-2014/ISBN/978-1-58503-796-4/Errata/<p> The layout of the Jansen mechanism is not accurately listed in the book and will not animate as such. Please see the corrected image below. </p><img src="https://static.sdcpublications.com/images/errata/9781630571313-11-24.jpg" style="max-width:100%;" /> https://www.sdcpublications.com/Textbooks/Learning-Autodesk-Inventor-2014/ISBN/978-1-58503-796-4/Errata/