SDC Publications: Interior Design Using Autodesk Revit 2021 Book Errata

Chapter 1 Page 36

Autodesk has replaced Autodesk 360 (A360) with Autodesk Drive. The functionality covered in the book is similar in Autodesk Drive. Following the links provided in the book will provide you with a link to the new site. Alternatively, use this link to access Autodesk Drive: https://drive.autodesk.com/

Chapter 4 Page 33

Step 49c and Figure 4-3.17 show the incorrect RGB values for 'G' (green). It should be 224. Not 226 as shown in the book. See the image below.

Chapter 9 Page 20

Step 25 should reference page 8-47 and not page 8-20.

Chapter 10 Page 17

Step #2 of Downloading Casework Content, should read:

"Go to Architects ➜ Revit/CAD -- Casework, click on the MAILCENTER SEPT 2016 options, and then click Download All Revit Blocks to download this file (70+mb): Modular Casework - May 2022.zip"

Chapter 10 Page 41

Updated download instructions:

From the Hamilton casework library previously downloaded:

HCS_MCBE.rfa (Base Cabinet - 2 Door 1 Drawer)
- Type: MCBE302433
HCS_MCBI.rfa (Base Cabinet – Sink)
- Type: MCBI362433
HCS_MCDD.rfa (Base Cabinet – 4 Drawer)
- Type: MCDD242433
HCS_MCWA.rfa (Wall Cabinet - 2 Door)
- Type: MCWA301418
- Type: MCWA301436
- Type: MCWA361424
HCS_MCWB_C.rfa (Wall Cabinet - 1 Door)
- Type: Right MCWC231436
HCS_MCPF.rfa (Accessories - Base End Filler)
- Type: MCPF33
HCS_MCPH.rfa (Accessories - Wall Cab Filler)
- Type: MCPH36

FYI: Model numbers change occasionally. In that case, select a similar style and size.

Chapter 10 Page 41

Under the Placing Content section, step 16, the Family "Standard Finishes\HamiltonCaseworkSolutions-Materials.rfa" is not part of the Hamilton casework library previously downloaded. The link below will download the textures (jpg files) and an Autodesk material library which can be opened from within the Revit Material Browser. From there, the materials can be loaded into your project.

Here is the link: https://hamiltoncs.com/download/materials-library-2022/

Chapter 10 Page 42

Figure 10-5.7 has been revised with updated labels.

Chapter 10 Page 43

Figure 10-5.8 has been revised with updated labels.

Chapter 12 Page 27

Step 70. Should say: Right-click again and pick Type Properties.