https://www.sdcpublications.com/Textbooks/Engineering-Graphics-SOLIDWORKS-2018-Video/ISBN/978-1-63057-152-8/Errata/A list of the know errors for the book Engineering Graphics with SOLIDWORKS 2018 and Video Instruction.Sun, 05 Apr 2026 03:25:13 -0500http://www.rssboard.org/rss-specification1235https://static.sdcpublications.com/images/common/logo_rss.pnghttps://www.sdcpublications.com/Textbooks/Engineering-Graphics-SOLIDWORKS-2018-Video/ISBN/978-1-63057-152-8/Errata/14454SaturdaySunday<p> Aligned Dimension, Example 1: The figure points out the 44mm and 10mm vertical dimensions to be "aligned dimensions", when in fact the figure is an example of unidirectional dimensions. In order for the vertical 44mm and 10mm dimensions to be aligned dimensions, the "44" text and "10" text must both be rotated 90 degrees counter-clockwise. This will make the text parallel to their respective dimension lines, which is the provided definition of an aligned dimension. </p>https://www.sdcpublications.com/Textbooks/Engineering-Graphics-SOLIDWORKS-2018-Video/ISBN/978-1-63057-152-8/Errata/<p> In the last figure on the bottom right of the page, the very final line of the calculations should be "<strong>Negative Allowance (Interference) = .0009</strong>". </p>https://www.sdcpublications.com/Textbooks/Engineering-Graphics-SOLIDWORKS-2018-Video/ISBN/978-1-63057-152-8/Errata/