https://www.sdcpublications.com/Textbooks/Design-Integration-Using-Autodesk-Revit/ISBN/978-1-63057-802-2/Errata/A list of the know errors for the book Design Integration Using Autodesk Revit 2027.Wed, 09 Sep 2026 03:02:58 -0500http://www.rssboard.org/rss-specification1257https://static.sdcpublications.com/images/common/logo_rss.pnghttps://www.sdcpublications.com/Textbooks/Design-Integration-Using-Autodesk-Revit/ISBN/978-1-63057-802-2/Errata/14454SaturdaySunday<p> Step 8, Autodesk renamed some items in the list. The instructions should now say to check only the boxes for the items listed: </p> <ol type="a"> <li>Analytical Pipe Connection Types</li> <li>[4 items starting with] "Cable"</li> <li>Circuit Naming Scheme</li> <li>[4 items starting with] "Conductor"</li> <li>[4 items starting with] "Conduit"</li> <li>Construction Types</li> <li>Distribution System</li> <li>[4 items starting with] "Duct"</li> <li>[3 items starting with] "Electrical"</li> <li>Filters</li> <li>[2 items starting with] "Flex"</li> <li>Fluid Types</li> <li>Halftone and Underlay Settings</li> <li>Mechanical Equipment Sets</li> <li>MEP Hidden Line Settings</li> <li>[3 items starting with] "Panel Schedule"</li> <li>[6 items that start with] "Pipe" or "Piping"</li> <li>Space Type Settings</li> <li>System-Zone Types</li> <li>View Templates</li> <li>Voltage Types</li> <li>[2 items starting with] "Wire"</li> </ol>https://www.sdcpublications.com/Textbooks/Design-Integration-Using-Autodesk-Revit/ISBN/978-1-63057-802-2/Errata/<p> Step 15, add sub-item: "d. Add any missing ceilings per the steps defined in Chapter 6." </p> https://www.sdcpublications.com/Textbooks/Design-Integration-Using-Autodesk-Revit/ISBN/978-1-63057-802-2/Errata/