https://www.sdcpublications.com/Textbooks/Design-Integration-Using-Autodesk-Revit/ISBN/978-1-63057-250-1/Errata/A list of the know errors for the book Design Integration Using Autodesk Revit 2020.Sun, 05 Apr 2026 11:09:25 -0500http://www.rssboard.org/rss-specification771https://static.sdcpublications.com/images/common/logo_rss.pnghttps://www.sdcpublications.com/Textbooks/Design-Integration-Using-Autodesk-Revit/ISBN/978-1-63057-250-1/Errata/14454SaturdaySunday<p> Autodesk has replaced Autodesk 360 (A360) with Autodesk Drive. The functionality covered in the book is similar in Autodesk Drive. Following the links provided in the book will provide you with a link to the new site. Alternatively, use this link to access Autodesk Drive: <a href="https://drive.autodesk.com/" target=_blank">https://drive.autodesk.com/</a> </p>https://www.sdcpublications.com/Textbooks/Design-Integration-Using-Autodesk-Revit/ISBN/978-1-63057-250-1/Errata/<p> Step 9 should direct you to refer back to 2-38 for basic printing information. </p>https://www.sdcpublications.com/Textbooks/Design-Integration-Using-Autodesk-Revit/ISBN/978-1-63057-250-1/Errata/<p> Steps 51 and 52 should instruct you to pick the top and bottom edge <strong>quadrant</strong> instead of the midpoint. </p>https://www.sdcpublications.com/Textbooks/Design-Integration-Using-Autodesk-Revit/ISBN/978-1-63057-250-1/Errata/<p> Step 9 should read "On the <strong><em>Appearance</em></strong> tab, set the Title Text to <strong>1/8” Arial</strong> (Figure 12-3.3)." </p>https://www.sdcpublications.com/Textbooks/Design-Integration-Using-Autodesk-Revit/ISBN/978-1-63057-250-1/Errata/