https://www.sdcpublications.com/Textbooks/Complete-Guide-Mold-Making-SOLIDWORKS/ISBN/978-1-63057-646-2/Errata/A list of the know errors for the book The Complete Guide to Mold Making with SOLIDWORKS 2024.Mon, 04 May 2026 15:23:28 -0500http://www.rssboard.org/rss-specification517https://static.sdcpublications.com/images/common/logo_rss.pnghttps://www.sdcpublications.com/Textbooks/Complete-Guide-Mold-Making-SOLIDWORKS/ISBN/978-1-63057-646-2/Errata/14454SaturdaySunday<p> For the Parting Surface Distance, enter: <strong>.400in</strong>, as correctly shown in the figure. </p>https://www.sdcpublications.com/Textbooks/Complete-Guide-Mold-Making-SOLIDWORKS/ISBN/978-1-63057-646-2/Errata/<p> In the section "For Parting Surface Distance, enter: .750 in. (arrow) it should also specify to enable the "<strong>Flip Offset</strong>" checkbox as shown in the figure. </p>https://www.sdcpublications.com/Textbooks/Complete-Guide-Mold-Making-SOLIDWORKS/ISBN/978-1-63057-646-2/Errata/<p> Step 2. Applying Scale, after "Switching to the Mold Tools Tab" you should "<strong>Select Plastic Part under the Feature Manager Solid Bodies folder</strong>" to select the component to scale. </p> https://www.sdcpublications.com/Textbooks/Complete-Guide-Mold-Making-SOLIDWORKS/ISBN/978-1-63057-646-2/Errata/<p> In the section "For Bodies to Subtract, select Chamfer1 (the engineered part)." should read "<strong>For Bodies to Subtract, select Scale1 (the engineered part).</strong>." </p>https://www.sdcpublications.com/Textbooks/Complete-Guide-Mold-Making-SOLIDWORKS/ISBN/978-1-63057-646-2/Errata/