https://www.sdcpublications.com/Textbooks/Certified-SOLIDWORKS-Professional-Advanced-Preparation/ISBN/978-1-63057-062-0/Errata/A list of the know errors for the book Certified SOLIDWORKS Professional Advanced Preparation Material.Tue, 14 Apr 2026 10:16:00 -0500http://www.rssboard.org/rss-specification824https://static.sdcpublications.com/images/common/logo_rss.pnghttps://www.sdcpublications.com/Textbooks/Certified-SOLIDWORKS-Professional-Advanced-Preparation/ISBN/978-1-63057-062-0/Errata/14454SaturdaySunday<p> Step 5: The image on this page shows the flat pattern that includes Hem feature in it, therefore the measurement of 16.696in is not correct for this step. </p> <p> The correct flat pattern for this step (shown below) does not include the Hem feature and the correct measurement is 16.043in. </p><a href="https://static.sdcpublications.com/images/errata/978-1-63057-018-7-4-7.jpg" target="_blank"><img src="https://static.sdcpublications.com/images/errata/978-1-63057-018-7-4-7.jpg" style="max-width:100%;" /></a> https://www.sdcpublications.com/Textbooks/Certified-SOLIDWORKS-Professional-Advanced-Preparation/ISBN/978-1-63057-062-0/Errata/<p> Step 7. Creating Hem. The instructions say to select the Tear Drop type but the image shows a Rolled type hem. The tear Drop will not allow a 310 degree angle but the rolled will. The instructions should specify the Rolled hem type. </p> https://www.sdcpublications.com/Textbooks/Certified-SOLIDWORKS-Professional-Advanced-Preparation/ISBN/978-1-63057-062-0/Errata/<p> Step 17 is missing a centerline and a relation to make the Spline looks like the image. Add a Vertical Centerline and a Tangent relation between the Spline and the centerline as noted. </p><img src="https://static.sdcpublications.com/images/errata/9781630570187-5-19.jpg" style="max-width:100%;" /> https://www.sdcpublications.com/Textbooks/Certified-SOLIDWORKS-Professional-Advanced-Preparation/ISBN/978-1-63057-062-0/Errata/