https://www.sdcpublications.com/Textbooks/CSWE-Certified-SolidWorks-Expert-Preparation/ISBN/978-1-58503-942-5/Errata/A list of the know errors for the book CSWE - Certified SolidWorks Expert Preparation Materials.Tue, 14 Apr 2026 15:55:14 -0500http://www.rssboard.org/rss-specification485https://static.sdcpublications.com/images/common/logo_rss.pnghttps://www.sdcpublications.com/Textbooks/CSWE-Certified-SolidWorks-Expert-Preparation/ISBN/978-1-58503-942-5/Errata/14454SaturdaySunday<p> The material for this lesson is 1060 Alloy, the material for part in the actual exam is 6061 Alloy. </p> https://www.sdcpublications.com/Textbooks/CSWE-Certified-SolidWorks-Expert-Preparation/ISBN/978-1-58503-942-5/Errata/<p> The text should say to suppress mates #2 and #3 as shown in the screenshot. </p> https://www.sdcpublications.com/Textbooks/CSWE-Certified-SolidWorks-Expert-Preparation/ISBN/978-1-58503-942-5/Errata/<p> In the second paragraph the text should say "Edit Sketch Plane." </p> https://www.sdcpublications.com/Textbooks/CSWE-Certified-SolidWorks-Expert-Preparation/ISBN/978-1-58503-942-5/Errata/<p> The 1st paragraph that refers to the 1st image should say: Delete the 3.000 dimension for now, and later it will be replace by an angular dimension. </p> <p> The 1st image on this same page should show the dimension 3.000 attach to the origin, as shown in the previous image. </p> https://www.sdcpublications.com/Textbooks/CSWE-Certified-SolidWorks-Expert-Preparation/ISBN/978-1-58503-942-5/Errata/