https://www.sdcpublications.com/Textbooks/Beginners-Guide-SOLIDWORKS-2017-Level/ISBN/978-1-63057-063-7/Errata/A list of the know errors for the book Beginner's Guide to SOLIDWORKS 2017 - Level I.Sun, 05 Apr 2026 03:25:13 -0500http://www.rssboard.org/rss-specification1235https://static.sdcpublications.com/images/common/logo_rss.pnghttps://www.sdcpublications.com/Textbooks/Beginners-Guide-SOLIDWORKS-2017-Level/ISBN/978-1-63057-063-7/Errata/14454SaturdaySunday<p> On 2.48 you are asked to change a dimension. The wrong dimension is pictured. The correct image is shown below. </p> <p> Below are the revised images. </p><a href="https://static.sdcpublications.com/images/errata/9781630570637-87.jpg" target="_blank"><img src="https://static.sdcpublications.com/images/errata/9781630570637-87.jpg" style="max-width:100%;" /></a> https://www.sdcpublications.com/Textbooks/Beginners-Guide-SOLIDWORKS-2017-Level/ISBN/978-1-63057-063-7/Errata/<p> Bullet point two under tips should say: Draw the revolved feature's profile using the following dimensions </p> <p> Below are the revised images. </p><a href="https://static.sdcpublications.com/images/errata/9781630570637-133-2.jpg" target="_blank"><img src="https://static.sdcpublications.com/images/errata/9781630570637-133-2.jpg" style="max-width:100%" /></a> <br /> <a href="https://static.sdcpublications.com/images/errata/9781630570637-133-1.jpg" target="_blank"><img src="https://static.sdcpublications.com/images/errata/9781630570637-133-1.jpg" style="max-width:100%" /></a> https://www.sdcpublications.com/Textbooks/Beginners-Guide-SOLIDWORKS-2017-Level/ISBN/978-1-63057-063-7/Errata/<p> Exercise 8, the shell thickness is missing. It should be 0.125" The updated Crankshaft's drawing's image is provided below. <a target="_blank" href="https://static.sdcpublications.com/images/errata/9781630570637_162.png"><img src="https://static.sdcpublications.com/images/errata/9781630570637_162.png" style="max-width:100%" /></a> </p> https://www.sdcpublications.com/Textbooks/Beginners-Guide-SOLIDWORKS-2017-Level/ISBN/978-1-63057-063-7/Errata/<p> The oil pan gasket thickness is incorrectly listed in the book. Please use the image below. <a target="_blank" href="https://static.sdcpublications.com/images/errata/9781630571481_152_gasket.png"><img src="https://static.sdcpublications.com/images/errata/9781630571481_152_gasket.png" style="max-width:100%" /></a> </p> https://www.sdcpublications.com/Textbooks/Beginners-Guide-SOLIDWORKS-2017-Level/ISBN/978-1-63057-063-7/Errata/<p> The keyway's depth dimension is missing. The updated Crankshaft's drawing's image is provided below. <a target="_blank" href="https://static.sdcpublications.com/images/errata/9781630570637_221.png"><img src="https://static.sdcpublications.com/images/errata/9781630570637_221.png" style="max-width:100%" /></a> </p> https://www.sdcpublications.com/Textbooks/Beginners-Guide-SOLIDWORKS-2017-Level/ISBN/978-1-63057-063-7/Errata/<p> The Crank case top dipstick thread count should say to make the thread pitch .075" with <strong>3 turns</strong>. </p><a href="https://static.sdcpublications.com/images/errata/9781630570637_332-2.png" target="_blank"><img src="https://static.sdcpublications.com/images/errata/9781630570637_332-2.png" style="max-width:100%;" /></a> https://www.sdcpublications.com/Textbooks/Beginners-Guide-SOLIDWORKS-2017-Level/ISBN/978-1-63057-063-7/Errata/