https://www.sdcpublications.com/Textbooks/Analysis-Machine-Elements-Using-SolidWorks/ISBN/978-1-58503-705-6/Errata/A list of the know errors for the book Analysis of Machine Elements Using SolidWorks Simulation 2012.Tue, 14 Apr 2026 10:17:29 -0500http://www.rssboard.org/rss-specification823https://static.sdcpublications.com/images/common/logo_rss.pnghttps://www.sdcpublications.com/Textbooks/Analysis-Machine-Elements-Using-SolidWorks/ISBN/978-1-58503-705-6/Errata/14454SaturdaySunday<p> The cylinder circumference formula on the 3rd line from bottom is incorrect. It should read: “. . . by the lesser of the cylinder circumference (&pi;d_i = &pi;^*144 = 452.4 mm) or cylinder length . . .” </p> https://www.sdcpublications.com/Textbooks/Analysis-Machine-Elements-Using-SolidWorks/ISBN/978-1-58503-705-6/Errata/<p> The Analysis Insight section should say: The magnitude of Shear Force components in the X-direction varies from a high of 629 N at bolts #1and #2 in the row closest to the applied load to a high of 890 N at bolts #3 and #4 in the row furthest from the applied load. </p> https://www.sdcpublications.com/Textbooks/Analysis-Machine-Elements-Using-SolidWorks/ISBN/978-1-58503-705-6/Errata/<p> Exercise 1 files (named Column 7-1 and Plate 7-1) dimensions that do not agree with those shown in the textbook on page 7-31. The textbook images, however, show the desired (i.e., "correct") values. </p> https://www.sdcpublications.com/Textbooks/Analysis-Machine-Elements-Using-SolidWorks/ISBN/978-1-58503-705-6/Errata/